Channel Islands The Peregrine

0 Rating
695,00 €
In Stock
Al Merrick Peregrine de 5'8'' a 6'4''
Medidas Tablas
Tipo Foam
Sistema Quillas
Tipo Quillas
 Back to: Shortboards

Free shipping for orders over 79€ for Peninsula and Portugal.

Minimum order 19€ without shipping costs. Delivery time 24/48 hours by UPS, SEUR and Correos Express.

Secure SSL payment by Paypal, Card or Bank Transfer.

14 days refund if you are not satisfied. Questions? +34 670 466 314

Al Merrick Peregrine

  • Named after the fast and powerful falcon that tends to breed on coastal cliffs. This new model connects with the board’s design for fast, powerful surfing and reflects Dane and Courtney’s interest in falconry. Four-channels fuel this all around high performance shortboard suitable for all wave types. Designed for maximum down the line speed, quick transitions, and big rail turns.
  • The peregrine has a low entry rocker that’s accelerated through the back. The rail rocker is low but with ample break around the front fins and staged by the exit of the channels, creating extreme release near the trailing fin and off the tail. Center rocker is straighter and fast with the effect being exaggerated by the deep channels running out the back. The channels sit within a generous single concave that runs the length of the board and goes flat at the tail block.
  • The flat deck provides positive flex patterns, volume distribution and feel under the feet. Should be ordered an 1/8th of an inch thinner than a customer’s usual thickness. (i.e. If the customer usually rides a board with a 2 1/2 center thickness, they should order The Peregrine at 2 3/8 and can expect it to have the same general rail thickness, feel and flotation as a board that is 2 1/2). Rails are round, medium to full. Designed to work best in waist to ceiling high surf. Ride this board your same height up to a couple inches longer. Also makes a good smaller wave board when ordered shorter and wider.
  • Peregrines come stock with four channels, and are thruster only.
  • Incluye refuerzo de carbono en el Tail.

Medidas recomendadas para la fabricación:

  • 5'8 x 18 3/8 x 2 1/16 - 23.1 Litros.
  • 5'9 x 18 1/2 x 2 1/8 - 24.5 Litros.
  • 5'10 x 18 3/4 x 2 3/16 - 26.0 Litros.
  • 5'11 x 19 x 2 1/4 - 27.5 Litros.
  • 6'0 x 19 1/8 x 2 5/16 - 28.8 Litros.
  • 6'1 x 19 1/4 x 2 3/8 - 30.2 Litros.
  • 6'2 x 19 1/2 x 2 7/16 - 31.9 Litros.
  • 6'3 x 19 3/4 x 2 1/2 - 33.6 Litros.
  • 6'4 x 20 x 2 9/16 - 35.3 Litros.

Si quieres realizar alguna modificación en las medidas de tu tabla y añadirle o quitarle unas pulgadas o algún litro puedes contactar con nosotros para que le pasemos tu pedido personalizado al taller. En caso de no tener stock disponible en tu medida y configuración de quillas seleccionadas pasaremos orden de fabricación al taller oficial Channel Islands en Europa y te entregaremos tu tabla en un plazo de 4-6 semanas.

¿Qué es la tecnología Spine-Tek?

Channel Islands Surfboards

Desde 1969, Channel Islands Surfboards ha trabajado duramente para desarrollar accesorios de surf innovadores de gran calidad y durabilidad siendo este su objetivo principal. Sus productos son probados por los miembros de su equipo que son surfistas profesionales muy reconocidos a nivel mundial como Jordy Smith o Dane Reynolds. Esta marca con base en Santa Barbara, California está orgullosa de fabricar sus accesorios en USA.

tienda tablas de surf Channel islands

comprar tabla de surf Al merrick


There are yet no reviews for this product.

Please log in to write a review. Log in