Grip Wax Mat Kit Panel

0 Rating
33,95 €
In Stock
Grip Adhesivo modular de 8 piezas
Color
 Voltar a: Grips

Portes grátis para encomendas superiores a 79 € para a Península e Portugal. Para encomendas inferiores, envio a partir de 3,85€.

Pedido mínimo de 19€. Retorno 14 dias se você não estiver satisfeito. Envio 24/48 horas pela SEUR e Correos Express.

Pagamento seguro SSL por Paypal, Cartão ou Transferência Bancária.

Horário de atendimento ao cliente de segunda a sexta das 10:00 às 19:30. Questões? +34 670 466 314

Panel Wax Mat kit

Eight (8) 3" x 12" Wax Mat panels.

  • Wax Mats have an excellent wet grip and is non-abrasive to the skin. May be used on the decks of surf, skimboards, marine crafts, bathtubs and any where an excellent slip resistant, non-abrasive, see-through surface is needed.
  • Excellent wet grip feels like wax.
  • Non-abrasive to the skin,  may be used on the decks of surf, skimboards, marine crafts, bathtubs and any where an excellent slip resistant.
  • Will not melt, no mess an it works well in all water temperatures.
  • Easy-to-apply peel and stick adhesive,  ypou can cleanup with soap and water.
  • Use fresh water to wash off any sand, salt, or dirt on the board. Dry board with a towel or rag.
  • Use a wax scraper or liquid wax remover to remove wax off the deck that will be covered by the wax mats.
  • Be sure the surface is completely dry and clean of any dirt, wax, water, etc. Wipe with isopropyl alcohol if necessary.

Note: Proper installation of the mats takes about the same amount of time as it takes to rub on a good coat of wax. Best not to be in a hurry.

  • Select desired locations and positions of the mats on the deck. A space of up to 1" between mats is fine. If the board does not have a stringer or center line, lay a strip of masking tape down the center of the deck as a guide.
  • Board temperature must be above 65 degrees Fahrenheit for adhesive to bond to the deck.
  • Peel off 3"- 4" of the liner at the end of the mat and press onto the deck. Peel off the rest of the liner and press the mat onto the deck. The mat can be lifted up and repositioned if necessary.
  • Press the entire mat firmly onto the board.
  • Use the end of a ruler, putty knife, wax scraper, or roller, and firmly press the mat onto the board as the liner is peeled off the adhesive. This prevents bubbles from forming under the panel.
  • Repeat process to the rest of the mats.

SurfCo Hawaii

Surfco Hawaii nace en 1986 como pioneros del Nose Guard. Sus protectores demostraron ser la mejor solución para reducir daños en la punta de las tablas. El invierno de 1986, la Nose Guard fue introducida y probada por surfistas profesionales en la costa norte de Hawaii. Desde entonces, Surfco Hawaii ha inventado y producido muchos productos únicos, como la punta de diamante, Quick Fix, Hot Grip y aletas Pro Teck. Estos productos han ganado a Surfco Hawaii una reputación internacional como fuente de productos de surf de calidad. Un equipo de más de 100 surfistas profesionales y particulares utilizan los productos de SurfCo Hawaii que año tras año revisa en innova sus productos para garantizar los mejores protectores del mercado.

Surf Shop Europe Surfmarket

Surfmarket Surfshop Europe

Comentários

Ainda não existem comentários para este produto.

Autentique-se para escrever um comentário. Iniciar sessão